KW Suspension Products

BMW E46 M3

KW Variant 1 Coilovers (E46 M3)

 

£1,052.00

 

Sporty handling combined with outstanding looks. With factory pre-configured damping.
The KW coilover kit Variant 1 inox-line is our entry model for more driving pleasure with an attractive and individually adjustable lowering. Due to its high-quality finish, the use of struts made from stainless steel, corrosion resistant springs and bump stops as well as compatible components stands for long driving pleasure – not just the car’s life.

Continuous lowering
With the KW coilover Variant 1 you can achieve maximum lowering in the TÜV-tested adjustment range. Depending on vehicle model this varies between 30 to 70mm or 50 to 90mm. Even after years you can adjust the height quickly and easily due to the dirt resistant trapezoid thread and composite collar. Lowering at the front axle is made using our one piece composite height adjuster, on the rear axle this is the same unless the car has a seperate spring and shock absorber. The supplied rear height adjuster sits either above or below the rear spring.

The benchmark for tuning fans
KW coilover Variant 1 inox-line satisfies the sporty driver with its harmonic basic setup. Our engineers develop for each vehicle a specific damper setup and spring rate to increase the driving pleasure with optimal balance of sportiness and practicality. In the end, you don’t buy any coilover, but a KW coilover which has been developed specifically for your type of vehicle. KW as a manufacturer uses only its own resources, high quality components and the same damper technology as high-volume manufacturers. With the KW coilovers Variant 1 inox-line , rolling motions of the body will be reduced during compression and you benefit from genuine directness and sportier handling while driving.

Trust In KW Experience
KW is the market leader and innovator of individual suspension solutions for road and racetrack for more than 15 years. No matter where in the world, car driver, automotive manufacturers and tuners rely on KW coilovers, Made in Germany . Each KW coilover kit, developed and manufactured in the Swabian town Fichtenberg, is subject to extensive stress tests during production to meet the high standards of our KW quality management. A 2-year warranty applies to all KW applications.

– Optimally pre-adjusted
– Sporty and comfortable dampening technology
– Stainless steel technology inox-line
– Individually height adjustable
– TÜV-tested adjustment range
– Ready to install complete solution
– High quality components for a long durability
– Complete documentation for easy handling


Setup – Factory pre-configured damping setup
The KW coilover Variant 1 inox-line has a vehicle-specific, fixed configured damper setup. The spring and damper match perfectly, so that you will experience an optimized balance of sportiness and comfort while driving.

Damper adjustment:
None
 
Lowering FA/RA:
20-40/20-40
 
Height Adj. FA/RA:
Thread/Thread
 
Material:
Stainless steel
 
Approval:
Teilegutachten (§19.3)
 
Axle load FA/RA:
– 990/- 1170

 

 

KW Variant 2 Coilovers (E46 M3)

 

£1,359.00

 

For more stability and driving comfort. With adjustable rebound damping.
Drivers who want more than just an outstanding look and lowering within the TÜV-tested adjustment range, will find the perfect suspension solution with our KW coilovers Variant 2 inox-line . Not only stainless steel struts, corrosion-resistant components great durability, you have the possiblity to adjust the dampers to your own requirements in rebound (16 clicks) are good reasons to buy KW coilovers Variant 2 inox-line .

More comfort or more sportiness – you decide!
As with all KW coilovers our engineers develop vehicle specific damper settings which undergo comprehensive test cycles in the Nürburgring Nordschleife and on our KW 7-post driving dynamic centre. With a KW coilover kit the driving experience is more dynamic and direct. Because of the rebound adjustablility with our KW Variant 2 coilovers you can have more influence in handling and comfort of the car. With 16 precise click you can adjust the KW dampers (firmer or more comfortable) without affecting the bottom valve of the compression damping.

Depending on vehicle type, the rebound valves of the KW twin-tube dampers have to be adjusted at the upper end of the piston rod with an integrated adjustment wheel or the twist-adjuster which is part of the delivery content. By increasing the rebound force via the adjustment wheel, the body movements are reduced. Your car will stay in line and you will have more stability at increased corner speed. If you change for example the wheel / tire combination (approved by the car manufacturer) to larger wheels, then with a KW coilover Variant 2 you will be able to adjust the car’s handling and the new wheels perfectly to each other.

KW Quality – Your satisfaction is our motivation
At KW’s headquarters in Fichtenberg each KW coilover Variant 2 inox-line kit is subject to extensive stress tests during production to meet the high standards of KW quality management. Every single damper and suspension kit is tested thoroughly. A 2-year warranty applies to all KW applications.

KW coilover struts are 100% rust-free and have an unlimited life time under all weather conditions. All parts are designed for long term use. After a salt spray test the KW coilover struts were free of oxidation. Even after years the height adjustment will not be affected.

– Rebound adjustable damper technology with 16 precise clicks
– Stainless steel technology inox-line
– Individual, continuous lowering
– TÜV-tested adjustment range
– Ready to install complete solution
– High quality components for a long life
– Complete documentation for an easy installation

Setup – Adjustable rebound damping with 16 clicks.
You have 16 clicks of adjustment with a KW coilover Variant 2 inox-line . The rebound adjustment changes the driving dynamics if the change the complete wheel set or install a set of winter tires. You can adjust the damping characteristics of the weather-resistant KW coilover 2 inox-line to be firmer or more comfortable, according to your own needs. The suspension is suitable for all competitive drivers who want more than just continuous lowering for their driving pleasure.

 
Damper adjustment:
Rebound damping
 
Lowering FA/RA:
20-40/20-40
 
Height Adj. FA/RA:
Thread/Thread
 
Material:
Stainless steel
 
Approval:
Teilegutachten (§19.3)
 
Axle load FA/RA:
– 990/- 1170

 

 

KW Variant 3 Coilovers (E46 M3)

 

£1,722.00

 

Unlimited individuality for performance & comfort.
Damping forces can be adjustment separately in rebound & compression.

Our engineers have developed a sporty yet harmonious basic setup, as with any KW coilover kit. To be able to guarantee the perfect suspension setup we test on our KW 7-post rig, as well as extensive driving tests on country roads, motorways and even on the Nürburgring Nordschleife. For years, the KW coilover kit Variant 3 inox-line is one of the top aftermarket products and is a benchmark for coilovers. It convinces sports car drivers, tuner, large-and small series manufacturer such as Alpina, MTM, Manthey, Oettinger and many more leading companies in the international automotive industry with its damping characteristics, quality finish and durability.

Advanced technology from motor sport
With the KW coilovers Variant 3 inox-line you will get much more than just a sporty lowering and excellent driving behaviour on all roads. It is based on our long experience as a suspension manufacturer and supplier for international motor sport, such as the touring car series ADAC GT Masters, FIA GT1, FIA GT3, International GT Open, WTC, VLN and the legendary ADAC Zurich 24h-race Nürburgring.

Similar to our racing coilovers from the KW Competition program, the KW coilovers Variant 3 inox-line can be adjusted independently in compression and rebound damping. This individual adjustment possibility is much appreciated by sports car manufacturers, tuners and drivers worldwide.

The perfect suspension setup for more driving pleasure
If you have already made your first performance modifications to your vehicle our KW coilovers Variant 3 will compliment your upgrades. The patented KW-valve technology for separate adjustment of rebound and compression damping allows you to individually setup your suspension.The adjustable KW bottom valve adjusts the low-speed range of the compression level in twelve clicks.

You don’t need any adjusting tools because of the patented compression adjuster at the lower end of the stainless steel housing. The adjustable compression damping with its twelve exact clicks allows you to manually influence body roll, without having to change the spring rate which optimally matches the rebound.

With the individually adjustable rebound setup of the KW coilover Variant 3 inox-line , you can directly influence the handling and comfort with its precise click adjustment. Depending on the vehicle type, the rebound valves of the KW twin-tube dampers on the upper end of the piston rod will be adjusted via an integrated adjustment wheel or a twist-adjustment wheel which is included in the delivery content.

By increasing the rebound force via the adjustment wheel body movements are reduced. You will have more stability during high speed cornering. If you change for example the wheel / tire combination (approved by the car manufacturer) to larger wheels, then with a KW coilover Variant 3 inox-line you will be able to adjust the car’s handling perfectly.

High quality, individual and durable
The KW coilover Variant 3 inox-line kit and every single damper are subject to extensive quality tests during production to meet the high standards of KW’s quality management. This is the only way we can meet our expectations to give up to five years warranty on our KW coilover Variant 3 inox-line when installed at one of our KW specialist dealer. KW coilover struts made of stainless steel are 100% rust-free and an unlimited life time.

Therefore the operation of the continuous lowering via the dirt-resistant KW trapezoid thread and the KW composite collar is also not affected after years. By the individual lowering with its continuous adjustment range, you can emphasize the sportiness of your vehicle visually. A feature that is very popular in the performance-oriented tuning scene.

– Rebound and compression damping adjustable damper technology
– Stainless steel technology inox-line
– Individual, continuous lowering
– TÜV-tested adjustment range
– High quality components for a long life
– Complete documentation for an easy handling
– Adjustable rebound damping with 16 exact clicks
– Adjustable compression damping with 12 exact clicks
– Unique, independent from each other working damping force adjustment

Setup: The individual adjustable rebound- & compression damping of the KW Variant 3 inox-line
The KW coilover kit Variant 3 inox-line is the perfect accessory for performance-oriented drivers and tuning enthusiasts who put a great demand on their suspension. The separately rebound and compression damping adjustable dampers with their well-thought-through click adjustment allow a perfect setup. So it is easy to influence the steering behaviour, directional stability, tire grip and handling characteristics when driving on the limit.

Damper adjustment:
rebound and compression damping
 
Lowering FA/RA:
20-40/20-40
 
Height Adj. FA/RA:
Thread/Thread
 
Material:
Stainless steel
 
Approval:
Teilegutachten (§19.3)
 
Axle load FA/RA:
– 990/- 1170

 

 

BMW E9X M3

KW EDC Cancellation Kit (E9X M3)

 

£317.00

 

KW’s cancellation kit for EDC vehicles allows the fitment of non-EDC dampers or coilovers without error messages or loss of functionality beyond the loss of damper control.

This kit can be used in conjunction with suspension from any manufacturer.

 

 

KW Height Adjustable Spring Kit (E9X M3)

 

£599.00

 

For improved looks and more driving dynamics – in OEM quality..

A constant struggle for enthusiasts is whether to choose basic lowering springs or coilovers – the former is cost-effective and results in lower suspension, while the latter gives the flexibility to adjust ride height for the perfect drop. Now you can have both.
KW’s Height Adjustable Spring kit gives you the ability to adjust your ride height like a coilover, but is cost effective and simple like a lowering spring kit. Another advantage is that EDC-equipped vehicles needn’t lose the clever, adjustable damping that the system brings as the original shock absorbers remain fitted.
Kit includes 4x KW spring height adjusters, 4x lowering springs, 2x helper springs and collars, 4x uprated bumpstops and adjustment spanner.
 
 
Lowering FA/RA:
5-25/5-25
 
Height Adj. FA/RA:
Thread/Thread
 
 
Approval:
Teilegutachten (§19.3)
 
Axle load FA/RA:
– 990/- 1170

 

 

KW Variant 1 Coilovers (E92 M3)

 

£1,180.00

 

Sporty handling combined with outstanding looks. With factory pre-configured damping.
The KW coilover kit Variant 1 inox-line is our entry model for more driving pleasure with an attractive and individually adjustable lowering. Due to its high-quality finish, the use of struts made from stainless steel, corrosion resistant springs and bump stops as well as compatible components stands for long driving pleasure – not just the car’s life.

Continuous lowering
With the KW coilover Variant 1 you can achieve maximum lowering in the TÜV-tested adjustment range. Depending on vehicle model this varies between 30 to 70mm or 50 to 90mm. Even after years you can adjust the height quickly and easily due to the dirt resistant trapezoid thread and composite collar. Lowering at the front axle is made using our one piece composite height adjuster, on the rear axle this is the same unless the car has a seperate spring and shock absorber. The supplied rear height adjuster sits either above or below the rear spring.

The benchmark for tuning fans
KW coilover Variant 1 inox-line satisfies the sporty driver with its harmonic basic setup. Our engineers develop for each vehicle a specific damper setup and spring rate to increase the driving pleasure with optimal balance of sportiness and practicality. In the end, you don’t buy any coilover, but a KW coilover which has been developed specifically for your type of vehicle. KW as a manufacturer uses only its own resources, high quality components and the same damper technology as high-volume manufacturers. With the KW coilovers Variant 1 inox-line , rolling motions of the body will be reduced during compression and you benefit from genuine directness and sportier handling while driving.

Trust In KW Experience
KW is the market leader and innovator of individual suspension solutions for road and racetrack for more than 15 years. No matter where in the world, car driver, automotive manufacturers and tuners rely on KW coilovers, Made in Germany . Each KW coilover kit, developed and manufactured in the Swabian town Fichtenberg, is subject to extensive stress tests during production to meet the high standards of our KW quality management. A 2-year warranty applies to all KW applications.

– Optimally pre-adjusted
– Sporty and comfortable dampening technology
– Stainless steel technology inox-line
– Individually height adjustable
– TÜV-tested adjustment range
– Ready to install complete solution
– High quality components for a long durability
– Complete documentation for easy handling


Setup – Factory pre-configured damping setup
The KW coilover Variant 1 inox-line has a vehicle-specific, fixed configured damper setup. The spring and damper match perfectly, so that you will experience an optimized balance of sportiness and comfort while driving.

Damper adjustment:
None
 
Lowering FA/RA:
10-40/5-35
 
Height Adj. FA/RA:
Thread/Thread
 
Material:
Stainless steel
 
Approval:
Teilegutachten (§19.3)
 
Axle load FA/RA:
– 1060/- 1140

 

 

KW Variant 3 Coilovers (E92 M3)

 

£1,706.00

 

Unlimited individuality for performance & comfort.
Damping forces can be adjustment separately in rebound & compression.

Our engineers have developed a sporty yet harmonious basic setup, as with any KW coilover kit. To be able to guarantee the perfect suspension setup we test on our KW 7-post rig, as well as extensive driving tests on country roads, motorways and even on the Nürburgring Nordschleife. For years, the KW coilover kit Variant 3 inox-line is one of the top aftermarket products and is a benchmark for coilovers. It convinces sports car drivers, tuner, large-and small series manufacturer such as Alpina, MTM, Manthey, Oettinger and many more leading companies in the international automotive industry with its damping characteristics, quality finish and durability.

Advanced technology from motor sport
With the KW coilovers Variant 3 inox-line you will get much more than just a sporty lowering and excellent driving behaviour on all roads. It is based on our long experience as a suspension manufacturer and supplier for international motor sport, such as the touring car series ADAC GT Masters, FIA GT1, FIA GT3, International GT Open, WTC, VLN and the legendary ADAC Zurich 24h-race Nürburgring.

Similar to our racing coilovers from the KW Competition program, the KW coilovers Variant 3 inox-line can be adjusted independently in compression and rebound damping. This individual adjustment possibility is much appreciated by sports car manufacturers, tuners and drivers worldwide.

The perfect suspension setup for more driving pleasure
If you have already made your first performance modifications to your vehicle our KW coilovers Variant 3 will compliment your upgrades. The patented KW-valve technology for separate adjustment of rebound and compression damping allows you to individually setup your suspension.The adjustable KW bottom valve adjusts the low-speed range of the compression level in twelve clicks.

You don’t need any adjusting tools because of the patented compression adjuster at the lower end of the stainless steel housing. The adjustable compression damping with its twelve exact clicks allows you to manually influence body roll, without having to change the spring rate which optimally matches the rebound.

With the individually adjustable rebound setup of the KW coilover Variant 3 inox-line , you can directly influence the handling and comfort with its precise click adjustment. Depending on the vehicle type, the rebound valves of the KW twin-tube dampers on the upper end of the piston rod will be adjusted via an integrated adjustment wheel or a twist-adjustment wheel which is included in the delivery content.

By increasing the rebound force via the adjustment wheel body movements are reduced. You will have more stability during high speed cornering. If you change for example the wheel / tire combination (approved by the car manufacturer) to larger wheels, then with a KW coilover Variant 3 inox-line you will be able to adjust the car’s handling perfectly.

High quality, individual and durable
The KW coilover Variant 3 inox-line kit and every single damper are subject to extensive quality tests during production to meet the high standards of KW’s quality management. This is the only way we can meet our expectations to give up to five years warranty on our KW coilover Variant 3 inox-line when installed at one of our KW specialist dealer. KW coilover struts made of stainless steel are 100% rust-free and an unlimited life time.

Therefore the operation of the continuous lowering via the dirt-resistant KW trapezoid thread and the KW composite collar is also not affected after years. By the individual lowering with its continuous adjustment range, you can emphasize the sportiness of your vehicle visually. A feature that is very popular in the performance-oriented tuning scene.

– Rebound and compression damping adjustable damper technology
– Stainless steel technology inox-line
– Individual, continuous lowering
– TÜV-tested adjustment range
– High quality components for a long life
– Complete documentation for an easy handling
– Adjustable rebound damping with 16 exact clicks
– Adjustable compression damping with 12 exact clicks
– Unique, independent from each other working damping force adjustment

Setup: The individual adjustable rebound- & compression damping of the KW Variant 3 inox-line
The KW coilover kit Variant 3 inox-line is the perfect accessory for performance-oriented drivers and tuning enthusiasts who put a great demand on their suspension. The separately rebound and compression damping adjustable dampers with their well-thought-through click adjustment allow a perfect setup. So it is easy to influence the steering behaviour, directional stability, tire grip and handling characteristics when driving on the limit.

Damper adjustment:
rebound and compression damping
 
Lowering FA/RA:
10-40/5-35
 
Height Adj. FA/RA:
Thread/Thread
 
Material:
Stainless steel
 
Approval:
Teilegutachten (§19.3)
 
Axle load FA/RA:
– 1060/- 1140

 

 

PLEASE CONTACT US WITH YOUR REQUIREMENTS AND WE WILL BE HAPPY TO ASSIST YOU

 

OR TO PURCHASE CONTACT

 

Sales@psdesigns.global

Print Print | Sitemap
© PS Automotive Consultancy and Design

E-mail