KW Variant 1 Coilovers (E46 M3)

KW Variant 1 Coilovers (E46 M3)

E46 + M3

Description

Sporty handling combined with outstanding looks. With factory pre-configured damping. The KW coilover kit Variant 1 inox-line is our entry model for more driving pleasure with an attractive and individually adjustable lowering. Due to its high-quality finish, the use of struts made from stainless steel, corrosion resistant springs and bump stops as well as compatible components stands for long driving pleasure – not just the car’s life.

Continuous lowering With the KW coilover Variant 1 you can achieve maximum lowering in the TÜV-tested adjustment range. Depending on vehicle model this varies between 30 to 70mm or 50 to 90mm. Even after years you can adjust the height quickly and easily due to the dirt resistant trapezoid thread and composite collar. Lowering at the front axle is made using our one piece composite height adjuster, on the rear axle this is the same unless the car has a seperate spring and shock absorber. The supplied rear height adjuster sits either above or below the rear spring.

The benchmark for tuning fans KW coilover Variant 1 inox-line satisfies the sporty driver with its harmonic basic setup. Our engineers develop for each vehicle a specific damper setup and spring rate to increase the driving pleasure with optimal balance of sportiness and practicality. In the end, you don’t buy any coilover, but a KW coilover which has been developed specifically for your type of vehicle. KW as a manufacturer uses only its own resources, high quality components and the same damper technology as high-volume manufacturers. With the KW coilovers Variant 1 inox-line , rolling motions of the body will be reduced during compression and you benefit from genuine directness and sportier handling while driving.

Trust In KW Experience KW is the market leader and innovator of individual suspension solutions for road and racetrack for more than 15 years. No matter where in the world, car driver, automotive manufacturers and tuners rely on KW coilovers, Made in Germany . Each KW coilover kit, developed and manufactured in the Swabian town Fichtenberg, is subject to extensive stress tests during production to meet the high standards of our KW quality management. A 2-year warranty applies to all KW applications.

– Optimally pre-adjusted – Sporty and comfortable dampening technology – Stainless steel technology inox-line – Individually height adjustable – TÜV-tested adjustment range – Ready to install complete solution – High quality components for a long durability – Complete documentation for easy handling

Setup – Factory pre-configured damping setup The KW coilover Variant 1 inox-line has a vehicle-specific, fixed configured damper setup. The spring and damper match perfectly, so that you will experience an optimized balance of sportiness and comfort while driving.

Damper adjustment:
None
 
Lowering FA/RA:
20-40/20-40
 
Height Adj. FA/RA:
Thread/Thread
 
Material:
Stainless steel
 
Approval:
Teilegutachten (§19.3)
 
Axle load FA/RA:
– 990/- 1170

£1,026.00

1026.00
KW Variant 1 Coilovers (E46 M3)
KW Variant 1 Coilovers (E46 M3)
Qty:

You have added the product to your basket. Would you like to checkout now or continue shopping?

Continue Shopping Checkout